Thyristor Module Scr
Input type:
Thermocouple: S B -WRe3-WRe25 WRe5-WRe26 (resolution 0.01o
Resistance temperature detector: Cu50, Pt100, rF50resolution 0.01 resolution for PT100 from -10 to +100 is 0.001o
Linear voltage: -5-55mV (resolution 1V );accuracy 0.05%
Linear voltage: 0-5V, 0-10V, 0-200V, 0~500V; accuracy 0.03%
Linear current (I4 module on MIO): 0-20mA,- 40mA
Linear resistance : 0-360ohm(resolution 0.001); accuracy 0.03%
Instrument Input range
mV (-5-55mV) S(-50+1760)K(-270+1370)E(-270+100J(-210 +1200) T(-270+400)R(-50+1760) B(40+1820o N(-270 +1300) Pt100(-200+850)Cu50(-50-+150 )F(0-300K) WRe3-WRe25(0+2310) -WRe5-WRe26(0+231)
Measurement accuracy :
Thermocouple accuracy up to 0.05%FS
mV (-555mV) S(0+1760) K(-150+1370E(-150-1000(-150-1200
T(-150+400)R(0+1760)-B(300 1820 N(-150 +1300 - Pt100(-200+850) Cu50(-50+150 F(0=300K) Wre3-Wre25(0+2310) WRe5-WRe26(0+2310)
Resistance temperature detector accuracy up to 0.03%FS Pt100(-200+850) Cu50(-50+150 F(0-300K)
Sampling Cycle : 0.2sec onceo When digital filter FILt=0response time 0.5sec
Temperature drift :o0.01%FS / (typical value is 50ppm/)
Control mode:
AI PID with auto tuning, adopting fuzzy logic PID algorithm.
Output mode (modularized)
Relay output (NO+NC): 250VAC/2A or 30VDC/1A
TRIAC no contact discrete output (NO or NC): 100-240VAC/0.2A (continuous), 2A (20mS
instantaneous, repeat periodo5s)
SSR Voltage output: 12VDC/30mA (used to drive SSR).
Model: AIJK3,AIK62, JK3,JK62